Kyle Slemmer
- Total activity 53
- Last activity
- Member since
- Following 0 users
- Followed by 2 users
- Votes 3
- Subscriptions 16
Articles
Recent activity by Kyle Slemmer-
Hengstler Encoders
Below is a list of Hengstler encoders that can be used as reference for servomotor feedback systems. These are all from Hengstler's own sites or product datasheets and describe various incremental ...
-
Indramat MAC Teardown - Halls Adjustment
There are many different sizes of Indramat (Rexroth) MAC motors, and each has their own unique method for physically mounting the required Hall/DC Tach assembly. Some of the larger MAC motors with ...
-
Heidenhain EBI 1135 Support
DescriptionThe Heidenhain EBI 1135 is an inductive rotary encoder without integral bearing designed for direct integration into servo motors. This encoder features a blind hollow shaft and supports...
-
How to Remove and Install SICK SKS/SKM and EKS/EKM Series Encoders
SICK SKx Hiperface and EKx Hiperface DSL encoders feature a threaded shaft that screws into the motor shaft. While their removal and installation is fairly simple, they can sometimes present with s...
-
TI-3100: In-Line Inductive Motor Power Filter Cable (10A max)
OVERVIEWThe purpose of this filter cable is to add induction to servo motors that do not have enough induction to satisfy the AMC analog amplifiers. When a motor does not have enough induction in t...
-
9-Step Guide to Completing the Generic Servo Motor Datasheet
Overview This guide provides a test procedure designed to be followed on every permanent magnet brushless servo motor. It is important to complete a datasheet for every motor you test. This procedu...
-
Using Electrical Angles for Testing and Setting Servomotor Feedback Alignment
Our software takes many different feedback devices and generates a common 'electrical angle' to show the position of the feedback. This allows technicians to follow a repeatable procedure for testi...
-
SEW Standard Alignment
We have several documented cases showing the SEW motors with resolvers use this standard alignment: +U-V=60E+U-W=120E-V+W=0EHere are some motor datasheet references: SEW CMP63M/BK/KY/RH1M/SB1 with ...
-
WinTI5000JX is being replaced with Athena! - New Features
We're happy to announce the release of our newest PC software, Athena. We've spent the past couple years transitioning our old WinTI5000JX software into this new environment that will allow for mo...
-
Yaskawa Serial Encoder Testing
INTRODUCTION Our latest release of Athena software now supports testing Yaskawa serial encoders from all of the various SIGMA series (SIGMA II, III, V, and 7) on the TI-5000JX. Please reach out to ...