Most VPL series motors will use our TI-5734 cable and TI-5106 module to test with the DSL software. The motor data is stored in the memory including the alignment needed. If you already have the cable and module you will need to checkout the software to access the software options shown below. Contact us for a quote if you don't already have access to the DSL software.
TI-5734 Feedback and Power Hybrid Test Cable
TI-5106 Module
https://www.mitchell-electronics.com/ti-5106-sick-hiperface-dsl-hardware-adapter-module/
Motor Datasheet
https://www.dropbox.com/s/w83w
Electronic Alignment
https://youtu.be/OzD49apn_mc
Some of the larger VP motors do have different connections using our TI-5738 cable show below.
https://www.dropbox.com/s/
M40
TI-5743 Direct to encoder cable for DSL encoders.
https://www.dropbox.com/s/7dahnbf5tvzw429/TI5743.pdf?dl=0
TI-3000JX Run Test with VPL motor:
https://youtu.be/Z9WXUQJVspk?t=82
Comments
0 comments
Please sign in to leave a comment.