Robinio Easley

  • Total activity 81
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 3 users
  • Votes 2
  • Subscriptions 49

Activity overview

Latest activity by Robinio Easley
  • Robinio Easley created an article,

    Panasonic MSM and Fanuc SL Series Motors with MFE2500 Encoders

        Motor/Feedback Description – The Fanuc SL series motors appear to have the same feedback and same alignment as the Panasonic MSM motors, so in this discussion we will not distinguish one from t...

  • Robinio Easley created an article,

    Specifications of the TI-5260 Lockup Switch and TI-5260-PSP Lockup Switch/Instek Power Supply

    The TI-5260-PSP Permanent Magnet Rotor Lockup Switch and Instek Variable DC Power Supply combo provide a convenient, organized method for locking the rotor on permanent magnet brushless servo motor...

  • Robinio Easley created an article,

    Heidenhain EnDat Serial Encoders: Incremental Line Counts

    Question: We have a question about Heidenhain ECN 1313 Series encoders. What does line count mean in Heidenhain encoders? We have two ECN 1313 encoders. One of them ECN 1313 512 62S12-78 and the ot...

  • Robinio Easley created an article,

    Phase Analog Resolver Testing

    "Phase Analog" style resolvers are wired in reverse of normal resolvers. Instead of using the standard setup of the reference winding on the rotor (Rotor Primary), the Phase Analog type have the re...

  • Robinio Easley created an article,

    Rexroth MS2N series motors

    Rexroth's newest motors are the MS2N series. As you can see from the model info below, they can come equipped with legacy Hiperface SKS/SKM and SEK/SEL encoder options, or they can come with the ne...

  • Robinio Easley created an article,

    B&R 8LS motors with hybrid connector

    The B&R 8LS series motors are starting to come equipped with a hybrid power/feedback connector. These motor models can be identified by these feedback types in their model code: S0, S1, S2, S3, etc...

  • Robinio Easley created an article,

    WinTI5000JX and Athena hangs on COM port selection

      In some rare instances you may be confronted with an incredibly long delay when selecting the COM port in our Windows software (WinTI5000JX or Athena). Normally when you click the COM selection d...

  • Robinio Easley created an article,

    Elau iSH motors with integrated drive

    These motors have an integrated drive on top. As with most motors with integrated drives, we do not support testing through the drive portion. However, you can remove the drive and get down to the...

  • Robinio Easley created an article,

    TI-5000EX/JX Resolver Port Diagnostics

    GENERAL DESCRIPTION Perform these simple steps to determine if your TI-5000JX resolver hardware is in need of inspection. You will need the TI-3011 resolver breakout board and two clip leads to com...

  • Robinio Easley created an article,

    AMC Drives: Dipswitch Settings

    The AMC B25A20AC, B30A40AC, B40A40AC, B60A40AC, and B100A400AC provide dipswitch settings for various amplifier configurations. It is recommended that you start with the following settings. You may...