Victor Contreras

While our software does support Sanyo Denki serial encoders found on the legacy P Series motors, this article explores the newer serial encoders that we cannot yet test. These are found on Q and R ...

BiSS (Binary Synchronous Serial) encoders are a type of digital rotary encoder that use a high-speed, synchronous data transfer protocol to communicate position and speed information from the encod...

The Bosch Rexroth MS2S series servo motors, optimized for the ctrlX DRIVE system, are designed to deliver high performance and precision in industrial automation applications. These motors are equi...

GENERAL DESCRIPTION Perform these simple steps to determine if your TI-5000EX resolver hardware is in need ofinspection. You will need the TI-3011 resolver breakout board and two clip leads to ...

The MKE series of motors are designed for working in harsh environments. The motors are constructed of "Flameproof Enclosures" and are heavily sealed off to prevent ingress of water, oil, dust, and...

Overview There is a wide range of SEW servo motors on the market including both synchronous and asynchronous types. These servo motors will typically use a resolver as the default feedback sensor, ...

General Description The SICK Stegmann CKS series of encoders are incremental encoders with commutation tracks. They have a threaded shaft which screws into the motor side, and that makes physical r...

The NUM SHX and SPX brushless servomotors come with a single hybrid connector and are fitted with Hiperface DSL encoders. We have not yet received any of these new model series for development, but...

Overview The Indramat (Bosch/Rexroth) 2AD are air-cooled asynchronous (spindle) motors.  Like any asynchronous spindle motor, they do not require alignment of the feedback device (if equipped), and...

Overview The Rexroth MAD motor series are air-cooled asynchronous (spindle) motors. The MAF series are the liquid-cooled versions.  These newer Rexroth models replace the legacy 2AD, ADF, and ADP s...