Kyle Slemmer

DescriptionThe Heidenhain EBI 1135 is an inductive rotary encoder without integral bearing designed for direct integration into servo motors. This encoder features a blind hollow shaft and supports...

SICK SKx Hiperface and EKx Hiperface DSL encoders feature a threaded shaft that screws into the motor shaft. While their removal and installation is fairly simple, they can sometimes present with s...

OVERVIEWThe purpose of this filter cable is to add induction to servo motors that do not have enough induction to satisfy the AMC analog amplifiers. When a motor does not have enough induction in t...

Overview This guide provides a test procedure designed to be followed on every permanent magnet brushless servo motor. It is important to complete a datasheet for every motor you test. This procedu...

Our software takes many different feedback devices and generates a common 'electrical angle' to show the position of the feedback. This allows technicians to follow a repeatable procedure for testi...

We have several documented cases showing the SEW motors with resolvers use this standard alignment: +U-V=60E+U-W=120E-V+W=0EHere are some motor datasheet references: SEW CMP63M/BK/KY/RH1M/SB1 with ...

We're happy to announce the release of our newest PC software, Athena. We've spent the past couple years transitioning our old WinTI5000JX software into this new environment that will allow for mo...

INTRODUCTION Our latest release of Athena software now supports testing Yaskawa serial encoders from all of the various SIGMA series (SIGMA II, III, V, and 7) on the TI-5000JX. Please reach out to ...

This article will help you identify the type of Yaskawa serial encoder equipped on your motor. If you already know and are looking for testing information, please reference this article instead: ht...

REQUIRED HARDWARE TI-5924 resolver test cable, TI-5040 (rev C) digital board test cable, and TI-5104 8VDC adapter module.   BACKGROUND While many motor brands have a standard alignment, there is no...