We currently do not support the Drive CLiQ protocol used on newer Siemens motors. This includes the legacy Drive CLiQ modules that are used in conjunction with supported feedback devices, and the newer encoders that have integrated Drive CLiQ functionality.
The legacy Drive CLiQ modules are often used with feedback devices that we do support (resolvers, Heidenhain EnDat encoders, and incremental encoders). The module can be bypassed and the feedback tested and run as normal, but if the module is faulty then the motor will still fail on the drive even if everything else is correct.
We are working on developing support for Drive CLiQ and will be excited to share the good news when we can.
We are working on developing support for Drive CLiQ and will be excited to share the good news when we can.
Comments
0 comments
Please sign in to leave a comment.