Larry Mitchell

Motors with Fanuc ABS, incremental, and serial encoders are supported by the TI-5000JX. The current revision software supports 6 and 8 pole Fanuc motors on all encoders (that we know of) except the...

The Generic Brush, Generic Resolver, Generic Pulse, and Generic Encoder selections allow you to run a wide variety of motors using very basic feedback types. While the Stegmann Hiperface encoders a...

Overview The Heidenhain serial encoders listed in the next section are supported by this selection. Heidenhain incremental encoders with A, B, and Z lines should be tested as Generic Incremental en...

The Generic Brush, Generic Resolver, Generic Pulse, and Generic Encoder selections allow you to run a wide variety of motors using very basic feedback types. While the Tamagawa serial encoders are ...

OverviewThe Unico 319-663 encoder appears to be the same as the Hengstler Type RA 58 SSI 24 bit serial encoder. There are 12 bits for counting revolutions and 12 bits for the rotational angle. Thes...

This is the TI-3000JX option for Allen Bradley motors with Stegmann Hiperface encoders. The Stegmann serial encoders listed in the next section are supported by this selection. Stegmann incremental...

Overview This section covers the so called digital Indramat motors and feedback. The part numbers begin with MDD, MHD, MKD, and MKE. These motors use complicated serial encoder and resolver feedbac...

General CommentsThis is the TI-3000BM option for Baumuller motors with Stegmann Hiperface serial encoders. The Baumuller serial encoders listed in the next section are supported by this selection.T...

Overview There are several models of Kawasaki serial encoders, and two are currently supported by the TI-5000JX. The H20/M21 8,192 count/rev encoders are used with relatively large robot motors. Co...

The Mitsubishi serial encoders listed in the next section are supported by this selection. Mitsubishi incremental encoders with A, B, and Z lines should be tested as Generic Incremental encoders.  ...