Larry Mitchell

The Generic Brush, Generic Resolver, Generic Pulse, and Generic Encoder selections allow you to run a wide variety of motors using very basic feedback types. While the Tamagawa serial encoders are ...

OverviewThe Unico 319-663 encoder appears to be the same as the Hengstler Type RA 58 SSI 24 bit serial encoder. There are 12 bits for counting revolutions and 12 bits for the rotational angle. Thes...

This is the TI-3000JX option for Allen Bradley motors with Stegmann Hiperface encoders. The Stegmann serial encoders listed in the next section are supported by this selection. Stegmann incremental...

Overview This section covers the so called digital Indramat motors and feedback. The part numbers begin with MDD, MHD, MKD, and MKE. These motors use complicated serial encoder and resolver feedbac...

General CommentsThis is the TI-3000BM option for Baumuller motors with Stegmann Hiperface serial encoders. The Baumuller serial encoders listed in the next section are supported by this selection.T...

Overview There are several models of Kawasaki serial encoders, and two are currently supported by the TI-5000JX. The H20/M21 8,192 count/rev encoders are used with relatively large robot motors. Co...

The Mitsubishi serial encoders listed in the next section are supported by this selection. Mitsubishi incremental encoders with A, B, and Z lines should be tested as Generic Incremental encoders.  ...

This is the TI-3000JX support for Fanuc motors with serial, incremental and absolute encoders. This support comes with the basic TI-3000JX unit. Motors with Fanuc ABS, incremental, and serial encod...

The Renco encoders supported by the TI-5000JX are tested as Generic Incremental Encoders and do not have a separate test. A section for them is included in this manual because, in the implementatio...

Overview This is the TI-3000JX option for the Indramat Digital motors. Indramat Digital motors with digital encoders can be run using the TI-3000JX Indramat software. Indramat MAC series motors usi...