Pin Configurations and Reference Information

The following tables show the pinouts for the various connectors used on the TI-3000JX. 

1) Main I/O Terminal Block, J1 Pinouts

2) Auxiliary I/O Terminal Block, J2 Pinouts

3) RS232 DCE Port, J3 Pinouts 

4) Power Supply Connector, J3 Pinouts 

5) Test Connector, J9 Pinouts 

6) Amplifier Connector, J10 Pinouts 

7) Resolver Connector, J11 Pinouts 

Test Cables

PDF sheets are available for all test cables used by the TI-3000JX and TI-5000JX tester products. These documents provide information on the wiring and connectors used with these cables. In the past the cable wiring has been documented in the user manual for each tester. For the following reasons, this method of documentation has become less satisfactory:

1. New cables are being added to frequently for the manual revisions to effectively keep up with the latest cables.

2. The large number of cables makes it unwieldy to put them all in the manual.

3. The cable sheets provide much more complete documentation since they specify connectors and assembly notes as well as the wiring.

4. The latest ATHENA software allows the cable sheet PDF files to be viewed or printed using the Help menu.

Test cables will no longer be documented in the tester manuals, and the PDF cable sheets will be available for download from the Mitchell Electronics, Inc. web site.