Victor-Contreras

The MKE series of motors are designed for working in harsh environments. The motors are constructed of "Flameproof Enclosures" and are heavily sealed off to prevent ingress of water, oil, dust, and...

General Description The SICK Stegmann CKS series of encoders are incremental encoders with commutation tracks. They have a threaded shaft which screws into the motor side, and that makes physical r...

The NUM SHX and SPX brushless servomotors come with a single hybrid connector and are fitted with Hiperface DSL encoders. We have not yet received any of these new model series for development, but...

Overview The Indramat (Bosch/Rexroth) 2AD are air-cooled asynchronous (spindle) motors.  Like any asynchronous spindle motor, they do not require alignment of the feedback device (if equipped), and...

Overview The Rexroth MAD motor series are air-cooled asynchronous (spindle) motors. The MAF series are the liquid-cooled versions.  These newer Rexroth models replace the legacy 2AD, ADF, and ADP s...

Overview These are permanent-magnet synchronous motors that will normally come equipped with an incremental encoder, 2500ppr (10,000 count) or a BiSS absolute encoder with 20 bit single turn and 12...

The Festo EMMx-AS series servo motors come equipped with different types of feedback devices such as Resolvers, Heidenhain EnDat encoders, and SICK Stegmann Hiperface encoders. When using serial en...

Overview  The Mitsubishi HG series are rotary servo motors from the later end of the Melservo J4 drives. They mostly come equipped with OBA/OSA18 encoders although they are often listed as 22-bit i...

Overview  The new Mitsubishi Melservo J5 series drives use motors that come equipped with a new 26-bit resolution battery-less absolute position encoder. The removable type encoders are labeled as ...

The TI-5000JX and TI-3000JX testers have a DC voltage output of 5V which is used to power many compatible encoders. Some feedback devices exist that require a different power supply. We offer a few...