Pin Configurations and Reference Information

1) Main I/O Terminal Block, J1 Pin Configuration 

2) Auxiliary I/O Terminal Block, J2 Pin Configuration

3) Power Supply Connector, J3 Pin Configuration

4) RS232 DCE Ports 0 and 1, J6 Pin Configuration

5) USB Connector, J9 Pin Configuration

6) Control Connector, J10 Pin Configuration 

7) Can Bus Connector, J11 Pin Configuration 

8) Resolver, J12 Pin Configuration 

Test Cables

PDF sheets are available for all test cables used by the TI-3000JX and TI-5000JX tester products. These documents provide information on the wiring and connectors used with these cables. In the past the cable wiring has been documented in the user manual for each tester. For the following reasons, this method of documentation has become less satisfactory:

1. New cables are being added to frequently for the manual revisions to effectively keep up with the latest cables.

2. The large number of cables makes it unwieldy to put them all in the manual.

3. The cable sheets provide much more complete documentation since they specify connectors and assembly notes as well as the wiring.

4. The latest ATHENA software allows the cable sheet PDF files to be viewed or printed using the Help menu.

Test cables will no longer be documented in the tester manuals, and the PDF cable sheets will be available for download from the Mitchell Electronics, Inc. web site.